dmesg - eVGA NVIDIA GeForce GTX 980 Ti
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.6-301.fc23.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 5.1.1 20150618 (Red Hat 5.1.1-4) (GCC) ) #1 SMP Fri Nov 20 22:22:41 UTC 2015
Command line: BOOT_IMAGE=/vmlinuz-4.2.6-301.fc23.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet rd.driver.blacklist=nouveau
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000998e1fff] usable
BIOS-e820: [mem 0x00000000998e2000-0x000000009a28dfff] reserved
BIOS-e820: [mem 0x000000009a28e000-0x000000009a2d6fff] ACPI data
BIOS-e820: [mem 0x000000009a2d7000-0x000000009af3efff] ACPI NVS
BIOS-e820: [mem 0x000000009af3f000-0x000000009b40afff] reserved
BIOS-e820: [mem 0x000000009b40b000-0x000000009b40bfff] usable
BIOS-e820: [mem 0x000000009b40c000-0x000000009b419fff] reserved
BIOS-e820: [mem 0x000000009b41a000-0x000000009cffffff] usable
BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x91097018-0x910b8c57] usable ==> usable
e820: update [mem 0x91087018-0x91096c57] usable ==> usable
e820: update [mem 0x91070018-0x91086e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000091070017] usable
reserve setup_data: [mem 0x0000000091070018-0x0000000091086e57] usable
reserve setup_data: [mem 0x0000000091086e58-0x0000000091087017] usable
reserve setup_data: [mem 0x0000000091087018-0x0000000091096c57] usable
reserve setup_data: [mem 0x0000000091096c58-0x0000000091097017] usable
reserve setup_data: [mem 0x0000000091097018-0x00000000910b8c57] usable
reserve setup_data: [mem 0x00000000910b8c58-0x00000000998e1fff] usable
reserve setup_data: [mem 0x00000000998e2000-0x000000009a28dfff] reserved
reserve setup_data: [mem 0x000000009a28e000-0x000000009a2d6fff] ACPI data
reserve setup_data: [mem 0x000000009a2d7000-0x000000009af3efff] ACPI NVS
reserve setup_data: [mem 0x000000009af3f000-0x000000009b40afff] reserved
reserve setup_data: [mem 0x000000009b40b000-0x000000009b40bfff] usable
reserve setup_data: [mem 0x000000009b40c000-0x000000009b419fff] reserved
reserve setup_data: [mem 0x000000009b41a000-0x000000009cffffff] usable
reserve setup_data: [mem 0x00000000a0000000-0x00000000afffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000045fffffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x9a29c000 ACPI 2.0=0x9a29c000 SMBIOS=0xf0570 MPS=0xfd850
SMBIOS 2.8 present.
DMI: Dell Inc. Precision Tower 5810/0K240Y, BIOS A07 04/14/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x460000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-through
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000C0000000 mask 3FFFC0000000 uncachable
1 base 0000A0000000 mask 3FFFE0000000 uncachable
2 base 030000000000 mask 3FC000000000 uncachable
3 base 00009E000000 mask 3FFFFE000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb10-0x000fdb1f] mapped at [ffff8800000fdb10]
Base memory trampoline at [ffff88000008f000] 8f000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02044000, 0x02044fff] PGTABLE
BRK [0x02045000, 0x02045fff] PGTABLE
BRK [0x02046000, 0x02046fff] PGTABLE
init_memory_mapping: [mem 0x45fe00000-0x45fffffff]
[mem 0x45fe00000-0x45fffffff] page 2M
BRK [0x02047000, 0x02047fff] PGTABLE
init_memory_mapping: [mem 0x440000000-0x45fdfffff]
[mem 0x440000000-0x45fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x998e1fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x997fffff] page 2M
[mem 0x99800000-0x998e1fff] page 4k
init_memory_mapping: [mem 0x9b40b000-0x9b40bfff]
[mem 0x9b40b000-0x9b40bfff] page 4k
BRK [0x02048000, 0x02048fff] PGTABLE
init_memory_mapping: [mem 0x9b41a000-0x9cffffff]
[mem 0x9b41a000-0x9b5fffff] page 4k
[mem 0x9b600000-0x9cffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x43fffffff]
[mem 0x100000000-0x43fffffff] page 1G
RAMDISK: [mem 0x3ed25000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009A29C000 000024 (v02 DELL )
ACPI: XSDT 0x000000009A29C098 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000009A2C8718 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000009A29C1D0 02C544 (v02 DELL CBX3 01072009 INTL 20091013)
ACPI: FACS 0x000000009AF3DF80 000040
ACPI: APIC 0x000000009A2C8828 0000C8 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000009A2C88F0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000009A2C8938 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000009A2C89D8 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: UEFI 0x000000009A2C8A18 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: BDAT 0x000000009A2C8A60 000030 (v01 DELL CBX3 00000000 INTL 20091013)
ACPI: HPET 0x000000009A2C8A90 000038 (v01 DELL CBX3 00000001 INTL 20091013)
ACPI: PMCT 0x000000009A2C8AC8 000064 (v01 DELL CBX3 00000000 INTL 20091013)
ACPI: WDDT 0x000000009A2C8B30 000040 (v01 DELL CBX3 00000000 INTL 20091013)
ACPI: SSDT 0x000000009A2C8B70 00D647 (v01 DELL PmMgt 00000001 INTL 20120913)
ACPI: SLIC 0x000000009A2D61B8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: MSDM 0x000000009A2D6330 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: BGRT 0x000000009A2D6388 000038 (v00 \xfffffff3\xffffffee 01072009 AMI 00010013)
ACPI: UEFI 0x000000009A2D63C0 00005C (v01 INTEL RstSataV 00000000 00000000)
ACPI: DMAR 0x000000009A2D6420 0000F4 (v01 DELL CBX3 00000001 INTL 20091013)
ACPI: ASF! 0x000000009A2D6518 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045fffffff]
NODE_DATA(0) allocated [mem 0x45ffea000-0x45fffdfff]
[ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044f600000-ffff88045f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000045fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000998e1fff]
node 0: [mem 0x000000009b40b000-0x000000009b40bfff]
node 0: [mem 0x000000009b41a000-0x000000009cffffff]
node 0: [mem 0x0000000100000000-0x000000045fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000045fffffff]
On node 0 totalpages: 4174952
DMA zone: 64 pages used for memmap
DMA zone: 49 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 9876 pages used for memmap
DMA32 zone: 632009 pages, LIFO batch:31
Normal zone: 55296 pages used for memmap
Normal zone: 3538944 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x91070000-0x91070fff]
PM: Registered nosave memory: [mem 0x91086000-0x91086fff]
PM: Registered nosave memory: [mem 0x91087000-0x91087fff]
PM: Registered nosave memory: [mem 0x91096000-0x91096fff]
PM: Registered nosave memory: [mem 0x91097000-0x91097fff]
PM: Registered nosave memory: [mem 0x910b8000-0x910b8fff]
PM: Registered nosave memory: [mem 0x998e2000-0x9a28dfff]
PM: Registered nosave memory: [mem 0x9a28e000-0x9a2d6fff]
PM: Registered nosave memory: [mem 0x9a2d7000-0x9af3efff]
PM: Registered nosave memory: [mem 0x9af3f000-0x9b40afff]
PM: Registered nosave memory: [mem 0x9b40c000-0x9b419fff]
PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
PM: Registered nosave memory: [mem 0xa0000000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xb0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88045fc00000 s97048 r8192 d29928 u262144
pcpu-alloc: s97048 r8192 d29928 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109667
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.6-301.fc23.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet rd.driver.blacklist=nouveau
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16170124K/16699808K available (7672K kernel code, 1264K rwdata, 3340K rodata, 1516K init, 1544K bss, 529684K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:65792 nr_irqs:896 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3492.090 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6984.18 BogoMIPS (lpj=3492090)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81eb9000 - ffffffff81ec0000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 28736 entries in 113 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000009b280000 end: 0x0000009b28efff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (fam: 06, model: 3f, stepping: 02)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 950568 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55873.44 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9a2d7000-0x9af3efff] (13008896 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 0:06:20, date: 12/20/15
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant []
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfbffbfff window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.1: [8086:2f09] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:2f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:03.3: [8086:2f0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb13e000-0xfb13efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb13d000-0xfb13d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb120000-0xfb12ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb13c000-0xfb13c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb139000-0xfb139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb138000-0xfb1383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb130000-0xfb133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:8d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb137000-0xfb1373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2826] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb136000-0xfb1367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb135000-0xfb1350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:17c8] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0fb0] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.1: PCI bridge to [bus 05]
pci 0000:00:03.2: PCI bridge to [bus 06]
pci 0000:00:03.3: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:09:00.0: [104c:8240] type 01 class 0x060400
pci 0000:09:00.0: supports D1 D2
pci 0000:00:1c.1: PCI bridge to [bus 09-0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x91070018-0x93ffffff]
e820: reserve RAM buffer [mem 0x91087018-0x93ffffff]
e820: reserve RAM buffer [mem 0x91097018-0x93ffffff]
e820: reserve RAM buffer [mem 0x998e2000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b40c000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.1: PCI bridge to [bus 05]
pci 0000:00:03.2: PCI bridge to [bus 06]
pci 0000:00:03.3: PCI bridge to [bus 07]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xb01fffff]
pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:00:1c.1: PCI bridge to [bus 09-0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0xb0000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:08: resource 1 [mem 0xb0000000-0xb01fffff]
pci_bus 0000:08: resource 2 [mem 0xb0200000-0xb03fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19288K (ffff88003ed25000 - ffff88003fffb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8d070000-0x91070000] (64MB) mapped at [ffff88008d070000-ffff88009106ffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325620afb1f, max_idle_ns: 440795254135 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x2e
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x2e
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1450569980.381:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xf1000000-0xf1200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xf1000000, mapped to 0xffffc90002000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb13d000 port 0xfb13d100 irq 27
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xb impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136100 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136180 irq 28
ata7: DUMMY
ata8: SATA max UDMA/133 abar m2048@0xfb136000 port 0xfb136280 irq 28
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.6-301.fc23.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.6-301.fc23.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.6-301.fc23.x86_64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.6-301.fc23.x86_64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 4695b0c57273084447bac07e5df135964f60e7e1'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Magic number: 11:600:102
rtc_cmos 00:00: setting system clock to 2015-12-20 00:06:21 UTC (1450569981)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Crucial_CT240M500SSD1, MU02, max UDMA/133
ata5.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Crucial_CT240M500SSD1, MU02, max UDMA/133
ata6.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: ATA-8: TOSHIBA DT01ACA100, MS2OA7S0, max UDMA/133
ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata8.00: configured for UDMA/133
ata1.00: ATAPI: PLDS DVD+/-RW DS-8ABSH, LD11, max UDMA/133
ata1.00: configured for UDMA/133
usb 3-1: new high-speed USB device number 2 using ehci-pci
scsi 0:0:0:0: CD-ROM PLDS DVD+-RW DS-8ABSH LD11 PQ: 0 ANSI: 5
usb 4-1: new high-speed USB device number 2 using ehci-pci
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 4:0:0:0: Direct-Access ATA Crucial_CT240M50 MU02 PQ: 0 ANSI: 5
ata5.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 5:0:0:0: Direct-Access ATA Crucial_CT240M50 MU02 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: Enabling discard_zeroes_data
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 7:0:0:0: Direct-Access ATA TOSHIBA DT01ACA1 A7S0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 7:0:0:0: [sdc] 4096-byte physical blocks
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
ata5.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2
sd 4:0:0:0: [sda] Attached SCSI disk
ata6.00: Enabling discard_zeroes_data
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 1-13: new full-speed USB device number 2 using xhci_hcd
sd 7:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 1516K (ffffffff81d3e000 - ffffffff81eb9000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 508K (ffff880001781000 - ffff880001800000)
Freeing unused kernel memory: 756K (ffff880001b43000 - ffff880001c00000)
random: systemd urandom read with 14 bits of entropy available
systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 3-1: New USB device found, idVendor=8087, idProduct=800a
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Setup Virtual Console...
usb 4-1: New USB device found, idVendor=8087, idProduct=8002
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started dracut ask for additional cmdline parameters.
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Journal Service...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1450569981.861:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1450569981.869:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1450569981.904:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569981.921:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569981.975:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569982.000:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569982.004:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569982.018:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569982.086:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:00:6a:4d:23:e7
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
8021q: 802.1Q VLAN Support v1.8
usb 1-13: string descriptor 0 read error: -110
usb 1-13: New USB device found, idVendor=1532, idProduct=0016
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: can't set config #1, error -110
usb 1-14: new low-speed USB device number 3 using xhci_hcd
usb 1-14: New USB device found, idVendor=03f0, idProduct=0024
usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14: Product: HP Basic USB Keyboard
usb 1-14: Manufacturer: CHICONY
usb 1-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:03F0:0024.0001/input/input5
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-14/input0
usb 1-13: USB disconnect, device number 2
usb 1-13: new full-speed USB device number 4 using xhci_hcd
usb 1-13: New USB device found, idVendor=1532, idProduct=0016
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: Razer DeathAdder
usb 1-13: Manufacturer: Razer
input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:1532:0016.0002/input/input6
hid-generic 0003:1532:0016.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-13/input0
audit: type=1130 audit(1450569992.961:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569993.051:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569993.136:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1450569993.208:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1450569993.208:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569993.350:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569993.358:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1450569993.358:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1450569993.360:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1450569993.361:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[238]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
EXT4-fs (dm-0): re-mounted. Opts: (null)
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
random: nonblocking pool is initialized
vboxdrv: TSC mode is Invariant, tentative frequency 3491914155 Hz
vboxdrv: Successfully loaded version 5.0.10_RPMFusion (interface 0x00240000)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
systemd-journald[660]: Received request to flush runtime journal from PID 1
systemd-journald[660]: File /var/log/journal/045f2260b3854db9b3ca501ad2ee9c3f/system.journal corrupted or uncleanly shut down, renaming and replacing.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
[drm] Initialized drm 1.1.0 20060810
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
Adding 8191996k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8191996k SSFS
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
fuse init (API version 7.23)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input14
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 12
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 3
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 88
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 45
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 13
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 50
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 13
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
Adjusting hpet more than 11% (2075056183 vs 2601267907)
systemd-journald[660]: File /var/log/journal/045f2260b3854db9b3ca501ad2ee9c3f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 50
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 13
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 50
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 12
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
e1000e: enp0s25 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sdc] Stopping disk
serial 00:03: disabled
e1000e: EEE TX LPI TIMER: 00000011
sd 4:0:0:0: [sda] Stopping disk
sd 5:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 1099.511 msecs
PM: late suspend of devices complete after 1.420 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 11.564 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.587 msecs
PM: early resume of devices complete after 0.775 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
rtc_cmos 00:00: System wakeup disabled by ACPI
serial 00:03: activated
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
sd 4:0:0:0: [sda] Starting disk
sd 7:0:0:0: [sdc] Starting disk
sd 5:0:0:0: [sdb] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
ata6.00: Enabling discard_zeroes_data
ata8.00: configured for UDMA/133
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata5.00: Enabling discard_zeroes_data
usb 4-1: reset high-speed USB device number 2 using ehci-pci
usb 3-1: reset high-speed USB device number 2 using ehci-pci
usb 1-14: reset low-speed USB device number 3 using xhci_hcd
usb 1-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-13: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 1051.030 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
done.
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
do_general_protection: 180 callbacks suppressed
traps: warsow.x86_64[11065] general protection ip:7f4490ac5292 sp:7ffcb7594990 error:0 in libui_x86_64.so[7f4490a30000+232000]
traps: warsow.x86_64[11231] general protection ip:7ff553fb1292 sp:7ffed4287c00 error:0 in libui_x86_64.so[7ff553f1c000+232000]
warsow.x86_64[11295]: segfault at 18 ip 00007f2001047292 sp 00007ffeb0824630 error 4 in libui_x86_64.so[7f2000fb2000+232000]
warsow.x86_64[11410]: segfault at 18 ip 00007f7e99047292 sp 00007ffec442f310 error 4 in libui_x86_64.so[7f7e98fb2000+232000]
e1000e: enp0s25 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 7:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdb] Synchronizing SCSI cache
sd 4:0:0:0: [sda] Synchronizing SCSI cache
sd 7:0:0:0: [sdc] Stopping disk
serial 00:03: disabled
e1000e: EEE TX LPI TIMER: 00000011
sd 4:0:0:0: [sda] Stopping disk
sd 5:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 1105.692 msecs
PM: late suspend of devices complete after 1.338 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 11.650 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.804 msecs
PM: early resume of devices complete after 0.917 msecs
usb usb3: root hub lost power or was reset
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
usb usb4: root hub lost power or was reset
rtc_cmos 00:00: System wakeup disabled by ACPI
serial 00:03: activated
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
sd 4:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdb] Starting disk
sd 7:0:0:0: [sdc] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata6.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata5.00: Enabling discard_zeroes_data
ata6.00: configured for UDMA/133
ata6.00: Enabling discard_zeroes_data
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: configured for UDMA/133
usb 3-1: reset high-speed USB device number 2 using ehci-pci
usb 4-1: reset high-speed USB device number 2 using ehci-pci
usb 1-14: reset low-speed USB device number 3 using xhci_hcd
usb 1-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-13: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 1050.894 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
done.
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 10
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 89
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 19
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 68
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 60
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 24
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 12
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 61
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 13
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 55
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 14
traps: warsow.x86_64[22477] general protection ip:7fa801047292 sp:7ffcab85cc90 error:0 in libui_x86_64.so[7fa800fb2000+232000]
warsow.x86_64[22604]: segfault at ffffffff ip 00000000ffffffff sp 00007ffd67db0268 error 14
warsow.x86_64[22697]: segfault at 0 ip (null) sp 00007ffe0255abc8 error 14 in warsow.x86_64[400000+bb000]
warsow.x86_64[22865]: segfault at 18 ip 00007fbe44ac5292 sp 00007ffd1532da90 error 4 in libui_x86_64.so[7fbe44a30000+232000]
warsow.x86_64[23470]: segfault at 18 ip 00007faf37400292 sp 00007ffc41269aa0 error 4 in libui_x86_64.so[7faf3736b000+232000]
warsow.x86_64[28582]: segfault at 18 ip 00007f99ceb11292 sp 00007ffe0de1eb60 error 4 in libui_x86_64.so[7f99cea7c000+232000]
warsow.x86_64[28939]: segfault at 18 ip 00007fbf062d5292 sp 00007ffd110a1760 error 4 in libui_x86_64.so[7fbf06240000+232000]
warsow.x86_64[29026]: segfault at 18 ip 00007fd7f13f2292 sp 00007ffed1fea640 error 4 in libui_x86_64.so[7fd7f135d000+232000]
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 29
warsow.x86_64[29151]: segfault at 18 ip 00007fdcebae2292 sp 00007ffc84365420 error 4 in libui_x86_64.so[7fdceba4d000+232000]
e1000e: enp0s25 NIC Link is Down
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:03: disabled
sd 7:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdb] Synchronizing SCSI cache
sd 7:0:0:0: [sdc] Stopping disk
sd 4:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 4:0:0:0: [sda] Stopping disk
sd 5:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 1107.620 msecs
PM: late suspend of devices complete after 1.413 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 11.558 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.856 msecs
PM: early resume of devices complete after 0.881 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
rtc_cmos 00:00: System wakeup disabled by ACPI
serial 00:03: activated
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
sd 4:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdb] Starting disk
sd 7:0:0:0: [sdc] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata5.00: disabling queued TRIM support
ata5.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata5.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata5.00: Enabling discard_zeroes_data
ata6.00: Enabling discard_zeroes_data
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
ata8.00: configured for UDMA/133
usb 3-1: reset high-speed USB device number 2 using ehci-pci
usb 4-1: reset high-speed USB device number 2 using ehci-pci
usb 1-14: reset low-speed USB device number 3 using xhci_hcd
usb 1-14: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-13: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 1050.898 msecs
PM: Finishing wakeup.
Restarting tasks ...
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:00.0: PCI bridge to [bus 0a]
done.
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
NOHZ: local_softirq_pending 02
perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000